Make a 6-10 minute animated documentary from the same sets as your shorts
Short answer: the same sets, cast and tools that make a 75-second vertical short can make a 6-10 minute film at 1920 x 1080. It is not a short stretched out: it needs real chapters, more shots and a much bigger render budget. Be aware the long-form route is new: the pack's run book says only one long-form test frame has been rendered so far, and no complete long film has been made with it yet. The demo film is a short.
Written by the Buy Agent Skills team. Updated 8 November 2026.

Shorts vs long form
| Short | Long video | |
|---|---|---|
| Length | 55-75 s | 6-10 minutes |
| Frame | 1440 x 2560 (9:16) | 1920 x 1080 (16:9) |
| Words | 180-200 | 900-1,300 |
| Shots | 22-30 | 40-70, each 6-15 s |
| Captions | Optional, planted in scene | None burned in; chapter timestamps in the description |
Structure
Go deeper than a short. Give each chapter its own turn and its own payoff. Chapter list and timestamps go in the video description. For research, the fact load is much larger, so build the claim table by chapter; see fact-checking AI videos.
Reusing sets and cast
The pack's 18 sets and 2D cast carry over. The look is the same as in the Blender sets guide. Where a story needs a place the sets cannot honestly play, build a new one; the pack's run book allows up to five new sets for a long film (three for a short).

Framing for wide
Set the film's aspect to 16:9 and render at 1920 wide. Camera field of view is vertical, so use roughly 45 to 55 degrees. Dress the set left and right, keep heads around 12 to 18% of frame width, and let people move across the frame.
Narration and pacing
Write 900 to 1,300 words. Keep the picture changing: each shot is 6-15 seconds, and a character should stay in view. As with shorts, never describe on screen what the viewer already sees.
Render budget
Planning figures from the pack:
- About 3 seconds a frame at 1920 x 1080 per Blender process on the tested setup.
- 6-10 minutes at 30 fps is 10,800 to 18,000 frames: roughly 9 to 15 hours in one Blender, or roughly 2.5 to 4 hours with four in parallel as the short used (our arithmetic, not a measurement).
- The pack's run book plans about 5 to 6 hours of rendering for a long film.
These are estimates, hardware dependent, and the long route is less proven than the short one. Time a sample of frames on your machine before committing, and use the 720p draft pass to fix staging first. Narration for a long video used a planning figure of about 12,000 ElevenLabs credits, against about 3,000 for a short (optional service).
Publishing notes
YouTube only for long videos in the pack. If you add a thumbnail, make it a 1280 x 720 JPEG under 2 MB. Check your channel's current rules for the length you can upload.
FAQ
How long does a long render take? The pack plans around 5-6 hours; your time depends on hardware. No complete long film has been rendered and timed yet.
Do I need a different license? No. The license does not separate shorts from long videos: One purchase licenses one named person, or one company for one internal team of up to 5 people. See the licenses page for the exact wording.
Can I cut shorts from the long video? The tools are separate pipelines at different aspect ratios. Reframing a 16:9 render into vertical is possible but not part of the tested workflow.
Long or short first? Shorts are the proven route. See the 12-step pipeline.
Get the pipeline
The Cartoon Films pack covers both. macOS on Apple Silicon only is tested, with Blender 5.2, Node 20+, Python 3.9+, ffmpeg and Claude Code.